A couple of weeks ago, I mentioned that my old Sega Rally driving cab was off to a new home to be replaced by a Red Ferrari, well here it is! It wouldn’t be a cab for me without a respective worklog Yesterday Mark from need a courier delivered the OR2SP cab Continue Reading
Arcade
CPS3 Repair Attempt
I purchased a CPS3 mobo only from YAJ a little while back in hope that it would work, but unfortunately my YAJ luck has run out (previously most “junk” stuff I’ve purchased has been perfect, but sadly this time it’s not so much the case ) When the CPS3 arrived, it Continue Reading
Sega Naomi NetDIMM and Normal DIMM repair
I had these two Sega Naomi DIMMs with the following issue The “no bios” one is the normal DIMM and the “faulty base” is the NetDIMM. I had previously tried to fix these two DIMMs with reflashing the bios I would say 10 times each – I eventually gave up Continue Reading
Wireless Phone Charger using Sega AIME card reader
For a little while now, I’ve been using the Sega AIME Control panel for Astro Cities (I’ve also since purchased another 2 of these panels giving me a total of 4 since I like the style so much). Since I’m not using any PCBs that would make sure of the Continue Reading
Sega Aero City – 2L12B and kick harness
Since I’ve pretty much decided on putting the DS CPS2 Multi on the Horizontal Aero, I figured it’d need a 2P panel. It most likely won’t be permanent, but having the ability to swap it around is always handy. Enter a 60 dollar Aliexpress repro… The post man delivered the Continue Reading
Sega Aero City – Number 2!
I’m sure those who have been keeping a close eye on my cabs know I have a silly theme of having pairs! Just because this cab is pretty rare in Australia, is not an excuse! 😀 About a month ago, I got delivery of another Aero City – once again thanks Continue Reading
Monkey Ball – Completed
Monkey Ball is done and dusted! (only waiting for the proper repro banana which will eventually come, but in its current state, it’s very playable :D) Artwork installed and a quick run through of beginner Such a fun game!!!
Monkey Ball Repro Part 2
An interim banana was 3d printed to use for the time being until I am able to get the proper banana from the guys on Arcade Projects – let the innuendo begin!! 😀 I got my Output Amp back in Feb with all the relevant components and built it as best Continue Reading
Upgrading Naomi DIMM F/W upgrade from 1.02 to 4.02
Here I upgrade an old, cheap and useless Naomi DIMM that is on version 1.02 to 4.02 so I can turn this cheap DIMM into a useful DIMM that can be used for Compact Flash Why: You might ask yourself why would you want to do this process instead of Continue Reading
Sega Aero City
Through the Candy Cab Gods (namely @DRAGONKZ), I’ve been able to secure one a candy cab grail – the Sega Aero City! It wouldn’t be a Caesar cabinet without a respective work log thread Long story, short, Dragonkz moved heaven and earth to secure this cab and once secured, he told Continue Reading