Worklog

This weekend that just passed, I set myself the goal of “just getting the shell screwed in to the base” as the shells had “dried*” *more on that later. The wiring deceivingly took WAAAAY longer than I expected as I decided I would take out all the old clips and Continue Reading

Wow, it’s been 4 months since I last updated! I haven’t really had much motivation to finish it off, I had one cab in its place with the rest of the cabs which made me really delay the finishing of the other cab. With that said, I recently sold off Continue Reading

Not much has been happening, we’ve had terrible weather the last few weeks and I just cbf atm.. lol The only thing I’ve worked on are the speakers. I purchased these speakers online https://www.parts-express.com/aurasound-ns2x3-184-4a-2-x-3-extended-range-driver-4-ohm–296-256 They are slightly bigger than the original stock speaker, but it’s the closest thing I can find Continue Reading

Managed to get some a few hours worth of work on the weekend. First had to spray the decal residue with some IPA The next 3 hours were spent on hand sanding/feathering on all the areas that had flaking. Gave it a good clean with wax and grease remover before Continue Reading

I hit a snag the other night  I started cleaning the second cab and as I gave it a good wipe down, the paint just started flaking off, and it got worse and worse as I cleaned more.. The initial thoughts were “touch up”, but what started like this… Ended Continue Reading

Since the first cab is now confirmed operational, this cab seemed to be the better condition cab so I gave it a good clean! It’s amazing what some elbow grease and a magic eraser can do! I personally like some “war wounds” on the cab so I decided to keep Continue Reading

Now I sorted out the monitors, it was time to start making my way onto the cab and seeing what else needs to be fixed. First off the rank was power. I needed to figure out what was the status of the power. This cab is 100v, so I purchased Continue Reading

So this post will be about the 2930! As mentioned in the previous post, when I plugged in the 2930 all I got was a blue image, I couldn’t get any Red or Green bias dialled in. When I reached out to Joey who said check the transistors which I Continue Reading