My to do list was as follows: Stuck with original colour scheme and the CP is looking FRESH! I know 6 buttons isn’t required for a vertical cab, but I figured I might as well do it from the beginning and have it ready if ever this cab goes back Continue Reading
Worklog
Atomiswave trivial update
Been working on the cab the last couple of nights looking at the “trivial” things Harness is done – I made two as DRAGONKZ is also wanting a set. This is totally different from the normal “J” harness for the Egret or the Vewlix since the start button location is Continue Reading
Operation CRT replacement
I hadn’t touched the cab at all this week as I only really wanted to “get into it” once the CRT was replaced. I did try to turn on the cab, but it was definitely dead, it also didn’t make a sound so I was slighly concerned, but that was Continue Reading
New Project – Sammy Atomiswave
It’s been a while since I had a new project A new thread means a new worklog for a new arcade cab! Back when I got the E2, I low key kind of knew that the OCD would eventually get to me and here we are today, the Blast City Continue Reading
Noir HD Upgrade
It’s almost been 3 years since both these Noirs had anything done to them. With SF6 releasing on Friday, it was only natural for things to get upgraded. I decided to upgrade my other HD cabs (will post about that in another thread) so the noir by default got the Continue Reading
Egret 2 – Cleaning, wiring, putting it all back together
The cab has been cleaned as best as I can and the last thing to do is give it a cut and polish, but she’s definitely looking MUCH better than when I first got it. With the chassis arriving back from Joey the other day, it was time to put Continue Reading
Egret 2 – speakers
Let’s talk speakers After using the Logitech Z407’s on my outrun2 cab, I thought this would be a perfect set of speakers to use on this machine to give it that 2.1 upgrade. Trawled through marketplace and found it half price compared to when I purchased mine at Bing Lee Continue Reading
Egret 2 – control panel and general update
It’s been a while since the last update – I always dread updates that’s why they’re so far in between haha I was bumbed for a little while as the temporary ms9 I had stopped working luckily, the proper MS9 from the cab was being serviced by JOMAC and it wasn’t Continue Reading
Rhythm Tengoku – Control Panel part 2
As previously mentioned, I had planned to wire harness with a JAMMA edge like this: @LemonyVengeance gave me the idea of bypassing the JAMMA edge and just wire it directly to the Blast City I/O. Due to the sheer amount of wire I needed, I figured it would be cheaper to Continue Reading
Egret 2 – Rotation Mech
Rotation Mech Time to rotate! After all, this is what the Egret is renowned for right? What a VERY nerve wracking experience that was to turn. Give me a frame, lift and turn any day of the week hahaha. I needed to make sure most of the cable ties were Continue Reading